Command Listing

3500 commands in the database

Displaying 901 — 1000

Command Name Description
AT+C2KCNMA No description
AT+CACM Resets the accumulated call meter value on the SIM
AT+CAD No description
AT+CALIBCMD No description
AT+CALIBR No description
AT+CALIDATE No description
AT+CALLCONN No description
AT+CALLPROGRESS No description
AT+CALLSTAT No description
AT+CALRM No description
AT+CAMEAUTO No description
AT+CAMERADATA No description
AT+CAMETEST No description
AT+CAMM Sets the Advice of Charge related accumulated call meter maximum value in SIM file
AT+CAOC Enables subscriber to get call cost information
AT+CAPL No description
AT+CARDTYPE No description
AT+CASIMS No description
AT+CASKTEST No description
AT+CATLIST No description
AT+CAVE No description
AT+CAVIMS No description
AT+CBC Returns battery status
AT+CBCAST No description
AT+CBKLT No description
AT+CBLKFTDF No description
AT+CBLTH No description
AT+CBST Selects bearer service of the data call
AT+CCALD No description
AT+CCED No description
AT+CCFC Allows control of the call forwarding service
AT+CCHC No description
AT+CCHO No description
AT+CCID No description
AT+CCLGS No description
AT+CCLK Sets the real-time clock of the MT
AT+CCLOCK No description
AT+CCMMD No description
AT+CCSS No description
AT+CCWA Enables the control of call waiting supplementary service
AT+CCWE Enables/disables sending of an unsolicited result code +CCWV before the accumulated call meter (ACM) max value is reached
AT+CDCONT No description
AT+CDDUR No description
AT+CDEFMP No description
AT+CDMAPARA No description
AT+CDTMF No description
AT+CDTSE No description
AT+CDU No description
AT+CDUR No description
AT+CDV No description
AT+CDVOL No description
AT+CEER Returns error report for: the failure in last unsuccessful call setup/modification, call release, GPRS attach/detach, PDP context activation/deactivation
AT+CELLINFO No description
AT+CEMAIL No description
AT+CEMODE Reads and sets UE modes of operation for EPS
AT+CEN No description
AT+CEPPI No description
AT+CEREG EPS network registration status
AT+CERTKEY No description
AT+CESQ Returns extended signal quality parameters: channel bit error rate, received signal code power, ratio of received energy per PN chip, ref signal RX quality
AT+CEUS No description
AT+CEVDP No description
AT+CFG No description
AT+CFSH No description
AT+CFUN Set phone functionality level. Depending on the arguments, may: reboot the phone, cause factory reset status 2, or invoke MiniOS mode
AT+CGAATT No description
AT+CGACT Activates/deactivates the PDP context
AT+CGANS Responds to a network-initiated call
AT+CGATT Attaches/detaches device to/from packet domain service
AT+CGAUTO Toggles automatic positive or negative response (auto-answer) to the receipt of a NW-initiated Request PDP Context Activation message from the network in UMTS/GPRS
AT+CGBCCONF No description
AT+CGCLASS Sets device to operate according to specified GPRS mobile class
AT+CGCMOD No description
AT+CGCONTRDP PDP context read dynamic parameters
AT+CGDACT No description
AT+CGDATA Connects to the Internet using cellular data
AT+CGDCONT Sets the PDP context parameters such as PDP type, APN, data compression, etc.
AT+CGDEL No description
AT+CGDSCONT Defines secondary PDP context
AT+CGED Describes cell environment
AT+CGEQMIN Related to 3G quality of service profile
AT+CGEQNEG No description
AT+CGEQOS Related to 3G quality of service profile
AT+CGEQOSRDP Related to 3G quality of service profile
AT+CGEQREQ Requests 3G quality of service profile
AT+CGEREP Toggles sending of unsolicited result codes
AT+CGLA No description
AT+CGMI Returns manufacturer identification
AT+CGMM Returns phone model
AT+CGMR Returns revision identification
AT+CGPADDR Returns IP address(es) of PDP context(s)
AT+CGPCO No description
AT+CGPIAF Prints IP address format
AT+CGPRCO No description
AT+CGPS No description
AT+CGQMIN Sets the minimum accepted profile for quality of service parameters such as precedence, delay, reliability, peak throughput, and mean throughput
AT+CGQREQ Sets quality of service parameters of a PDP connection such as delay, relaibility, etc.
AT+CGREG Returns the GPRS network registration status of the device
AT+CGSCONTRDP PDP context read dynamic parameters
AT+CGSDATA No description

Displaying 901 — 1000